Tupperware Pure&Go® Replacement Filter
Tupperware Pure&Go® Replacement Filter
SKU: 10165863000
Go Pure. Bring filtered, better tasting water wherever you want, wherever you go.
Keep your Pure&Go® Water Filter Bottle going with replacement filters. We're doing our part to preserve and protect the oceans and nature. Tupperware® is committed to preserving life on this planet through thoughtfully designed and sustainable goods like the Tupperware Pure&Go® Replacement Filter. Drink with a purpose.
DESCRIPTION
DESCRIPTION
Our Tupperware Pure&Go® Replacement Filter is an electro adsorptive filter: a high surface area absorbing filter media. Its depth structure is about 1mm thick with average pore size of 1.2 to 1.5 microns (μ). It captures very small-diameter substances and pathogens, removing larger particles mechanically.
The material of the filter is non-woven fibers –fibers that are bonded together. Unlike traditional woven filters, non-woven filters are made by randomly orienting the fibers and then bonding them together to create a three-dimensional structure. This creates a filter that has a high amount of surface area that can capture a wide range of particles and contaminants.
BENEFITS
BENEFITS
- Filter captures particles as small as 1.5 microns: with Advanced Disruptor® Technology
- Reduces contaminants: Chlorine and Particulate Class 1 particles
- Long-lasting: up to 2 months of usage*
- NFS 42 Certified: Tupperware Pure&Go® Replacement Filter is certified to reduce aesthetic impurities such as chlorine and taste/odor.
- Exclusive: for use only with your Pure&Go™ Water Filter Bottle
* Maximum amount of filtered water per filter: 300 L or 79 ¼ gallons (depending on tap water composition).
SPECS
SPECS
Dimensions (Metric/US):
H 7.1 x Ø 2.9 cm
H 2.8 x Ø 1.1 inch
Material: PP, silicone
USE & CARE
USE & CARE
- Please read the User Manual for detailed instructions.
- Maximum amount of filtered water per filter: 300 L or 79¼ gallons (depending on tap water composition).
- Maximum time of usage with one filter: 60 days. After reaching the maximum amount of water filtered and/or the maximum number of usage days, the filter has to be replaced.
- Use only treated tap water supplied by the urban districts.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Filtered water should be consumed within 24 hours. If longer than that, it should be discarded.
- If the filtered water develops an odor, please replace the filter immediately.
- The filter is designed to be used only with cold water (no syrups, carbonated soft drinks, infused water, etc).
- Product is for individual use only.
- Store the bottle and filter in a cool dry place. It is recommended to store the Tupperware Pure&Go™ Water Filter Bottle and filters away from direct sunlight and from heating appliances like ovens & coffee machines.
- Not for freezer
- Not for use in microwave
- Not dishwasher safe
- Do not use for carbonated drinks.
- Keep out of reach of children
TIPS
TIPS
- Replacement of filter: Remember to change the filter about every 2 months. Remove filter from straw and discard. Attach new filter, and activate it by soaking in room temperature tap water for 15 minutes before use.
- Get rid of chlorine with Tupperware Pure&Go™: If you’ve ever noticed an off taste in your tap water, it might be due to too much chlorine in the water.